Product Description

• Technology Type:Silicone
  

• Chemical Type:Alkoxysilane Adhesive
  

• Uncured Appearance:Black Paste
  

• Composition:One-Component
  

• Thixotropy:Thixotropic: Reduces fluid flow after dispensing
  

• Curing Method:Room-Temperature Vulcanization (RTV)
  

• Application Scenarios:Gasket Applications
  

• Specific Advantages:Excellent resistance to automotive engine oils
  

Instructions for Use

1. To ensure optimal performance, the bonding surfaces must be clean and free of grease.

2. The material starts to cure immediately upon exposure to air. Therefore, assemble the components as soon as possible after application.

3. Allow the bonded assembly to cure undisturbed (e.g., for 7 days) before subjecting it to heavy loads.

4. Excess uncured material can be wiped off with a non-polar solvent.

5. A positive displacement dispensing system is recommended for fully automated applications.

Storage Conditions

• Unopened products should be stored in a dry place. Storage information may be marked on the product container label.

• Optimal storage temperature: 8–21℃. Temperatures below 8℃ or above 28℃ will adversely affect product performance.

• Material removed from the container may be contaminated. Do not pour it back into the original container.