Product Description

• Technology Type:Acrylate
  

• Appearance:Translucent Blue
  

• Product Advantages:Fast curing; One-component; Curable in shadow areas; Easy to dispense; No stringing; Fluorescent under UV light
  

• Curing Method:UV (Ultraviolet)/Moisture Dual-Curing
  

• Application Scenario:Assembly
  

• Typical Packaging Application:Local protection of WLCSP and BGA on printed circuit boards
  

Instructions for Use

1. Operate the syringe with cotton gloves to avoid gaps between the adhesive and the inner wall of the syringe caused by bare hand contact.
2. Holding the syringe with warm hands (or contacting a cold syringe with warm hands) may cause the freeze-thaw phenomenon.
3. Substrates must be thoroughly cleaned to remove oil stains, dust, moisture and other contaminants to avoid affecting adhesion.
4. The actual shelf life may vary depending on the application method and storage conditions.

Thawing Procedures

1. Do not open the container until the contents reach 25°C. Remove any condensation on the container surface before opening.
2. Once thawed to 25°C, the adhesive must not be refrozen.
3. Repeated freezing/thawing of the syringe will generate gaps.
4. Reference heating time for different package sizes (at 25°C):
   1. 30cc syringe → 45 to 60 minutes
   2. 55cc syringe → 2 hours
   3. 6-ounce cartridge → 3 hours

Storage Conditions

• Optimal Storage Temperature: 2°C to 8°C